Introducing the Remora3
Written by Matthew Clark-Massera
Updated at July 2nd, 2025
Table of Contents
The Remora3
The Remora3 is the next gen version of the Remora series. It is an ultra-rugged, long-life battery powered device with up to 20+ years battery life on the Remora3 LTE-M/NB-IoT.
Click here to see detailed specifications Remora3 Cellular (LTE-M/NB-IoT)
Click here to see detailed specifications Remora3 Global (Cat1-bis/2G) -
Provisioning your Remora3
- Initial Provisioning - Remora3
- Choose a SIM Card Provider
- Install a Micro (4FF) SIM Card
- Review Admin Parameters
- Insert batteries
- Seal the Housing
- Integration
Features
Tracking Features
| Feature | Description |
|---|---|
| Scheduled Uploads | Configure specific times for a device to upload its data. |
| Inactivity Timer | Receive an alert when your assets are being underutilized. |
| Basic Tracking | These parameters determine the tracking mode and tracking intervals. |
| Battery Voltage | Set the battery low threshold. |
| Wake Filter | Filters out the small movements noticed by the accelerometer |
| Upload timeout | Select a registration strategy and specify the duration the device will attempt to upload data before timing out. |
| Accelerometer | Adjust the accelerometer thresholds required to wake the device or begin a trip. |
| Battery Good | Map battery 'good' and 'bad' to digital inputs |
| GPS Movement Trips | These settings control how the device starts and ends trips based on movement |
| Odometer | Use the device's onboard odometer and run hour readings to monitor your asset. |
| Turn by Turn Trips | Turn by Turn tracking allows the user to track an asset more accurately when in a trip. |
Bluetooth Features
| Feature | Description |
|---|---|
| BLE Eddystone | Filter your BLE Tags to a select set of Eddystone protocol tags |
| BLE iBeacon | Filter your BLE Tags to a select set of iBeacon protocol tags |
| BLE MAC Filter | Use the MAC address of your devices as filters to ignore unwanted signals |
| BLE User Integrated Tags | Filter your BLE Tags to any tag type to expand your options for BLE tags |
| BLE Advanced Scanning | Communicate via active scans and change the scan technology for better integration. |
Enabling Features
| Feature | Description |
|---|---|
| Time Zone and Daylight Savings | Configure specific datetime settings to assist with scheduled uploads. |
| After Hours | Assign working times by days of the week and activate auto-recovery mode. |
| High-G Detection | Monitor and log events where a device experiences significant G-force |
| Tip Detection and Rotation Counting | Identifies tipping events, and Rotation Counting tracks uncoiling movements |
| SMS | Prevent the device from responding to unwanted SMS commands. |
| Recovery Mode | Easily switch from infrequent tracking to ‘live tracking’ to recover an asset. |
Critical parameters
- See Battery Life Estimates - [Remora3] for battery life estimates and a battery life calculator
- See Critical Parameters - [Remora3] for how to best configure the device to be as energy efficient as possible when uploading data and obtaining GPS fixes.
Additional resources
- Pay attention to the SIM card you use - some can cause excessive battery drain - Roaming SIM Cards - Battery Life Impact
- Keep an eye on your battery status via OEM Server or Telematics Guru - Battery Level Monitoring - [Remora3]
