G62 LoRaWAN®
Click this link to check out the G62 LoRaWAN on the Digital Matter Website. The G62 LoRaWAN provides a number of configurable parameters, to allow its b...
Mon, 3 May, 2021 at 4:42 PM
The G62 LoRaWAN has two digital inputs, and one analog input. This can be used to notify the current state of an external device, or alert when certain inpu...
Wed, 29 Apr, 2020 at 2:10 PM
The attached document describes all of the uplink and downlink messages used by the G62 LoRaWAN. The downlink messages are not required for a simple implem...
Wed, 29 Apr, 2020 at 2:10 PM
One short flash and one longer flashReset indicationRapid short flashes for 10 secondsInvalid configuration detected at startup (use config app to set region...
Wed, 29 Apr, 2020 at 2:10 PM
v2.3 - Fixed spurious reset indications in ABP 1.0 FCnt reset support, which could cause loss of downlink connectivity until the next rejoin v2.2 - Added 1...
Mon, 14 Sep, 2020 at 10:38 AM
https://www.oemserver.com/tools/G62LoRaWAN/ConfigTool/setup.exe
Wed, 29 Apr, 2020 at 2:10 PM
The green wire on the G62 LoRaWAN harness is a digital output, of a switched to ground type. The output has 2 states: Disabled - The output is of high...
Wed, 29 Apr, 2020 at 2:11 PM
You can find the full payload specification and example decoder here. This decoder is written in Java Script and may be freely used as example code. To ...
Wed, 29 Apr, 2020 at 2:11 PM
The G62 LoRaWAN® keeps an on-board odometer and run-time accumulator. Given the potential for uplinks to not be received on the server, uploading a count pr...
Wed, 29 Jul, 2020 at 2:21 PM
This article specifies the documentation related to compliance tests, reports and certifications that the G62 LoRaWAN device has undergone. Below is a list ...
Mon, 21 Sep, 2020 at 5:07 PM