| General Safety Information |
- Only use the device for its intended purpose and in accordance with the device specific certifications.
- Comply with all local regulations and guidelines.
- Keep away from children.
- Do not disassemble, repair, or attempt to modify the device.
- Avoid storage and/or use within explosive environments.
- Use within specified environmental conditions.
- When fitting wired devices ensure sufficient safety precautions are taken so as to avoid electrocution.
|
| Battery Safety |
- Use only battery types approved by Digital Matter.
- Do not expose to extreme temperatures (below -30°C or above 60°C). Using above 60°C may result in the battery overheating and in extreme circumstances, combusting.
- Avoid puncturing, cutting or squashing batteries.
- Certain batteries may emit poisonous gasses or acid when damaged – handle batteries with care at all times, avoid contact with any liquid being emitted from the battery or changing damaged batteries in confined spaces.
- When applicable, charge using approved equipment only.
- Do not use if the battery appears damaged.
- Dispose of batteries properly in accordance with relevant regulations and directives.
|
| Handling and Installation |
- Mount the device securely using the provided screws.
- Care must be taken in sealing and affixing the device to ensure that no harm is suffered or damaged caused by the tools used or the device itself.
- Avoid moisture, vibration, or impact.
- Use proper PPE during installation.
- Follow the installation guide.
- Ensure that the RF does not interfere with the operation of any lifesaving medical equipment
|
| Transportation and Storage |
- Store in a cool, dry place.
- Keep in original packaging.
- Avoid direct sunlight exposure as much as possible.
- Comply with ICAO and IATA shipping regulations as necessary.
- If in storage and unused for a period of time, some LiPo batteries may become lose their charge and may require a recharge from time to time.
|
| Environmental Considerations |
- Avoid prolonged direct sunlight.
- Ensure ingress protection (IP) rating matches the relevant use.
- Dispose responsibly at end of lifecycle in accordance with relevant regulations and directives.
- Keep away from water and corrosive substances.
|
| Maintenance and Inspection |
- Check for wear or damage regularly.
- Clean with a soft, damp cloth.
- Apply firmware updates as recommended/suggested by Digital Matter.
- Inspect mounting and wiring connections using appropriate tools and suitably qualified individuals.
|
| Emergency Procedures |
- Disconnect power and contact support.
- Handle overheating or battery leakage with care.
- Use extinguishers if needed as per the safety data sheet of the batteries used in the device.
|
