The table below details the recommended screw sizes and torque for Digital Matter device housings. Guides on how to properly seal devices can be found under the specific device's getting started guide.
Device | Screw Size | Recommended Torque |
Eagle | 0.7 Nm | |
Falcon | 0.7 Nm | |
G62 | 0.7 Nm | |
Oyster/Oyster 2/Oyster3 | 0.7 Nm | |
Remora | 0.7 Nm | |
Remora2/Remora3 | 0.7 Nm | |
Yabby GPS/Wi-Fi | 2.5mm x 8mm | To be tested |
Guppy | 2.5mm x 6mm | To be tested |
Sensordata | 0.7 Nm | |
Sensornode | 0.7 Nm | |
| G70 | 0.7 Nm | |
| Hawk | 3.5mm x 12mm | 0.7 Nm |
| Yabby3 | 2.5mm x 8mm | To be tested |
| Yabby Edge Cellular | 2.5mm x 8mm | To be tested |
| Yabby Edge LoRaWAN | 2.5mm x 8mm | To be tested |
| Oyster Edge | 3.5mm x 12mm | 0.7 Nm |
| Oyster3 LoRaWAN | 3.5mm x 12mm | 0.7 Nm |