Support Home Portal Log in
Open navigation

G100 LED Behaviour

The G100 will flash the LED in the following ways:

  • On startup: a slow 0.5 Hz flash (once every 2 seconds).
  • On connection to the server: a fast 2 Hz flash (twice per second)
  • On sending records: solid on.
  • Disconnect and idle: a slow 0.5 Hz flash (once every 2 seconds).
  • Sleep: LED off
  • Applying a firmware update: a very fast flash for about 3 seconds, then into the startup sequence. 


The G100 will usually beep twice on startup.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.