Please find attached the technical drawings for the Remora housing.
Remora - Technical Drawing
DM Support
-
Connectivity: LTE-M/NB-IoT
- Networks and SIM Card Options
-
Device Network Settings
- SMS Commands
- Setting the Network Profile - LTE-M/NB-IoT devices
- Digital Matter SMS App
- 4G APN - Autonet
- Auto-APN feature (2G/3G Devices)
- 4G APN - How do I set the APN to connect to the network?
- 4G Network Settings
- 2G/3G APN - how do I set the APN on my device to get it on the network?
- Wired Provisioning Tool
- 2G/3G Multi-APN setup in Admin Parameters
- Connectivity Settings Fallback
- Custom APN setup requirements
- 4G Network - Device Behaviour Effects on Verizon
- 4G Battery Powered Device Behavior Effects - EMnify (multi-IMSI sims)
- DNS Troubleshooting on 4G
-
OEM Server
- Getting Started
-
Integration
- Choosing an Integration Strategy
- Create a Connector - set up an integration
- OEM + LE - What IP addresses should I allow through my firewall?
- Decode Cellular Uplink Payload using your Browser
- The HTTP/HTTPS Connector
- Times in the DM Protocol
- Example Payload
- BigSmall Byte
- Integration with the Azure IoT Hub
- Azure-IOT Hub Helper
- Integration - Common Issues
- Device Ports
- Direct to 3rd Party Server Integration - Considerations
- Setting up Direct to 3rd Party Server messaging on devices
- Unlocked vs Locked Devices
- OEM Installer Page
-
Troubleshooting
- GPS Troubleshooting
- Data Capturing on OEM
- Turn on Debug Logging
- View Device Logs
- View Server Logs
- View Live Server Logs in the Debug Terminal
- Issues with Firmware Updates
- Commonly seen Device logs/errors
- Since Committed/Since Connected and Troubleshooting
- Troubleshooting - Devices using excessive Data
- Device Firmware Not Updating
- Reset Device Statistics
- Admin Actions
-
MyGeotab
- Provision a MyGeotab Device on OEM Server
- Reseller's Guide to Getting Setup on OEM with MyAdmin
- DM Digital Input to MyGeotab Aux Mappings
- DM Profiling Counters to MyGeotab 3rd Party API Mappings
- DM to MyGeotab Integration Description
- Terminate (Un-provision) a Device
- Setting up a new reseller on OEM to use MyGeotab
- Reports
- Bolt2
-
Dart3
-
Getting Started
- Introducing the Dart3
- Initial Provisioning - [Dart3]
- DART3 12-wire Harness Definition
- Plug and Play Options for Dart3 (Cigarette Lighter and OBDII adapters).
- 3-Wire Install - [Dart3]
- SIM Cards and Data Usage - [Dart3]
- Overview of Operation - [Dart3]
- Default Tracking Parameters - Dart3
- Default I/O Mappings [Dart3]
- How long will my back-up battery last? - [Dart3]
- Dart3 FAQ
- Documents
-
Configuring IOs
- Digital Inputs Introduction - Dart3
- Set Up A Panic/Duress Button - [Dart3]
- Monitor a PTO/Fuel Pump - Dart3
- Dart3 - Outputs - General
- Dart3 - Connect an External Buzzer/LED
- Input Monitor - Dart3
- Configure Analogue Input [Dart3]
- Dart3- Buzzing on Analog Value Threshold
- Dart3 - Configuring Pulse Counting
- Parameters
- Run Hour + Odometer Monitoring
- Driver ID + Immobilisation
- Driver Behaviour - Accidents, Harsh Events, Speeding
- Troubleshooting
- Dart, Dart2
-
Getting Started
-
Hawk IoT Datalogger
- Getting Started
- Certifications
- Installation + Power Options
- Configuring Tasks
- Analogue Input
- 4-20mA
-
I²C
- Configure I²C Sensor Readings
- Hawk - Configure DM Ambient (Temp+Hum Sensor)
- Hawk - Configure DM Temp Probe (Deprecated)
- Hawk - Configure MaxBotix MB7040 I²C Ultrasonic Range Sensor
- Hawk - Configure T9602 Temperature Probe
- Hawk - Configure MLX90614 Temperature Sensor
- Hawk - Configure WNK8010TT Pressure Sensor
- Hawk - Configure MLX90640 Infrared Camera
- SDI-12
- 1-Wire
- RS-485
- Digital Inputs and Pulse Counting
- Digital Outputs
- Application Examples
-
G70 Cellular
- Getting Started
- Documents
-
Configuring I/Os
- Digital Inputs Introduction - G70
- Set Up A Panic/Duress Button - G70
- Monitor a PTO/Fuel Pump - G70
- G70 - Outputs - General
- G70 - Connect an External Buzzer/LED
- G70 - Input Monitor
- G70 - Configure Analogue Input
- Configure Buzzing on Excessive Tilt - G70
- G70 - Configuring Pulse Counting
- Scheduled Immobilization - G70
- Parameters
- Run Hour + Odometer Monitoring
- Driver ID + Immobilisation
- Driver Behaviour - Accidents, Harsh Events, Speeding
- Troubleshooting
- G62 Cellular
-
G120
-
Getting Started
- G120 -Getting Started
- Initial Provisioning- [G120]
- G120 Harness Definition
- 3-Wire Install - [G120]
- G120 Wiring Diagrams
- OBDII and Cigarette Lighter Harness options for temporary installs [G120]
- SIM Cards and Data Usage - [G120]
- Overview of Operation - [G120]
- Default Tracking Parameters [G120]
- Default I/O Mappings [G120]
- How long will my back-up battery last? - [G120]
- Documents
-
Configuring IOs
- Digital Inputs Introduction [G120]
- Set Up A Panic/Duress Button [G120]
- Monitor a PTO/Fuel Pump [G120]
- Outputs - General [G120]
- Connect an External Buzzer/LED [G120]
- Input Monitor [G120]
- Configure Analogue Input [G120]
- Input Monitor Setup
- RS232 Passthrough Mode
- G120 - Configuring Pulse Counting
- Geofence Downloads - G120
- Parameters
- Run Hour + Odometer Monitoring
-
Driver ID + Immobilisation
- Driver ID Options [G120]
- Immobiliser Install - Asset starts after valid Driver ID Scan [G120]
- Immobilisation Install - Asset can be immobilised from server [G120]
- Connecting a DM iButton Reader [G120]
- Connect 1-Wire Keypad [G120]
- Connect Hikvision Keypad [G120]
- G120 - Wiegand Driver ID Readers and Keypads
- Driver Behaviour - Accidents, Harsh Events, Speeding
- Iridium
- Troubleshooting
- G100
-
Getting Started
-
Oyster3 Cellular
-
Getting Started
- Introducing the Oyster3
- Initial Provisioning [Oyster3]
- Sealing the Device [Oyster3]
- Mounting and Installation
- SIM Cards and Data Usage [Oyster3]
- Default Tracking Parameters - [Oyster3]
- Oyster3- Tracking Modes
- Changing the Update Rate - [Oyster3]
- Critical Parameters - [Oyster3]
- Oyster3 - Default I/O mappings
- Oyster3 - FAQ
- Documents
- Batteries
-
Configuration
- Set up a connector - [Oyster3]
- Upload Timeouts - Network Registration Strategy [Oyster3]
- Sending Test Data - [Oyster3]
- Scheduled Uploads - Oyster3
- Geofence Downloads - Oyster3
- High-G Impact Detection - [Oyster3]
- Run Hour Monitoring - Oyster3 Cellular
- Recovery Mode - Oyster3
- GPS Settings - [Oyster3]
- Tip Detection and Rotation Counting - [Oyster3]
- Using Tip Detection for Tamper Detection [Oyster3]
- Oyster3 - Accelerometer Wakeup Thresholds
- Update Modem Firmware - Oyster3
- Inactivity Monitoring/Timer [Oyster3]
- High-G Events for Portable Toilet Tips -[Oyster3]
- Troubleshooting
-
Oyster & Oyster2
- Oyster2 - Getting Started
- Oyster2 - FAQ
- Oyster2 Battery Recommendations
- Oyster2 Cellular Battery Life Estimate Calculator
- Oyster2 Firmware Release Notes
- Oyster2 Tip Detection
- Oyster Cellular - Getting Started
- Oyster Cellular 3G Datasheet
- Oyster Standard -> Rugged Housing Adapter Drawing
- Oyster Rugged - Technical Drawing
- Radio Equipment Directive DoC
- Oysters - Technical Drawing
- Oyster Cellular Firmware Release Notes
- Oyster Cellular Battery Capacity Estimate
- Oyster Cellular Battery Life Estimate Calculator
- Oyster2 - Product Change Notifications
- Oyster2 - Certifications
-
Getting Started
-
Oyster Edge
-
Getting Started
- Introducing the Oyster Edge
- Initial Provisioning [Oyster Edge]
- Oyster Edge - Sealing the Device
- Oyster Edge - Mounting and Installation
- Sim Cards + Data Usage - Oyster Edge
- Default Tracking Parameters [Oyster Edge]
- Oyster Edge - Tracking Modes
- Oyster Edge - Changing the Update Rate
- Critical Parameters - Oyster Edge
- Oyster Edge - Default I/O Mappings
- Oyster Edge Cellular - FAQ
- Documents
- Batteries
- Location Engine and Scanning
- Bluetooth® Low Energy (BLE)
-
Configuration
- Upload Timeouts - Network Registration Strategy [Oyster Edge]
- Scheduled Uploads [Oyster Edge]
- Stationary Applications Requiring No Location [Oyster Edge]
- Oyster Edge - Recovery Mode
- Tip Detection and Rotation Counting - [OysterEdge]
- Oyster Edge - Accelerometer Wakeup Thresholds
- Using Tip Detection for Tamper Detection [Oyster Edge]
- Inactivity Monitoring/Timer [Oyster Edge]
- Run Hour Monitoring - Oyster Edge
- Disable In Trip Logging - Oyster Edge
-
Getting Started
-
Oyster3 LoRaWAN®
-
Oyster 3 LoRaWAN®
- Oyster 3 LoRaWAN® Configuration and Usage Guide
- Oyster 3 LoRaWAN® Provisioning Tool
- Oyster 3 LoRaWAN® Integration
- Oyster 3 LoRaWAN® Battery Life Estimate Calculator
- Decoding the Oyster 3 LoRaWAN® Uplink
- Encoding the Oyster 3 LoRaWAN® Downlink
- Simulating the Oyster 3 LoRaWAN® Uplink
- Oyster 3 LoRaWAN® LED Behaviour
- Oyster 3 LoRaWAN® Firmware Release Notes
- Oyster3 LoRaWAN - Certifications List
- Oyster3 LoRaWAN® Network Server Integrations
- Inactivity Monitoring/Timer [Oyster 3 LoRaWAN]
-
Oyster 3 LoRaWAN®
-
Remora3
- Getting Started
- Documents
- Batteries
- Configuration
- Bluetooth® Low Energy
-
Remora2 & Remora 3G
- Remora2 - Getting Started
- Remora 2 Firmware Release Notes
- Remora 2 Bluetooth Firmware Release Notes
- Remora2 - Battery Capacity Estimate and Low Battery Flag
- Remora2 Battery Recommendations
- Remora - Getting Started
- Battery Life, Battery Capacity Estimate & Low Battery Flag
- Tamper Detection
- Remora 3GE Datasheet
- Remora2 - Technical Drawing
- Remora - Technical Drawing
- Remora Firmware Release Notes
- Remora2 - Product Change Notifications
- Remora2 FAQ
- Remora2 - Certifications
-
Yabby Edge Cellular
-
Getting Started
- Introducing the Yabby Edge Cellular
- Yabby Edge Celluar - FAQ
- Initial Provisioning [Yabby Edge]
- Sealing the Device [Yabby Edge]
- Mounting and Installation [Yabby Edge Cellular]
- SIM Cards and Data Usage - [Yabby Edge Cellular]
- Default Tracking Parameters - [Yabby Edge Cellular]
- Tracking Modes - [Yabby Edge Cellular]
- Changing the Update Rate - [Yabby Edge Cellular]
- Critical Parameters [Yabby Edge Cellular]
- Yabby Edge - Default I/O Mappings
- Batteries
- Location Engine Scanning and Lookups
- General Documents
-
Configuration
- Yabby Edge - Upload Settings - Early Cellular Registration Abort
- Stationary Applications Requiring No Location [Yabby Edge]
- Recovery Mode - Yabby Edge
- Tip Detection and Rotation Counting - [YabbyEdge]
- Using Tip Detection for Tamper Detection [Yabby Edge]
- Yabby Edge Cellular - Accelerometer Wakeup Thresholds
- Inactivity Monitoring/Timer [Yabby Edge]
- Run Hour Monitoring - Yabby Edge Cellular
- Disable In Trip Logging - Yabby Edge
-
Getting Started
-
Yabby Edge LoRaWAN®
-
Getting Started
- Introducing the Yabby Edge LoRaWAN®
- Initial Provisioning - Yabby Edge LoRaWAN®
- Yabby Edge LoRaWAN® - Configuration and Usage Guide
- Yabby Edge LoRaWAN® Release Notes
- Yabby Edge LoRaWAN- Device management and Almanac Downloads
- Yabby Edge LoRaWAN - Improved GNSS Performance
- Inactivity Monitoring/Timer [Yabby Edge LoRaWAN]
-
Integration
- Yabby Edge LoRaWAN® Integration
- Decoding the Yabby Edge LoRaWAN® Uplink
- Setting up a Yabby Edge LoRaWAN Device via TTN (v3)
- Setting up a Yabby Edge LoRaWAN Device via Helium
- Setting up a Yabby Edge LoRaWAN Device via Actility (ThingPark Wireless and ThingPark Enterprise)
- Setting up a Yabby Edge LoRaWAN Device via LoRIot
- Setting up a Yabby Edge LoRaWAN Device via Senet
- Setting up a Yabby Edge LoRaWAN Device via Everynet
- Setting up a Yabby Edge LoRaWAN device via ChirpStack
- Generating Yabby Edge LoRaWAN® Downlinks
- Documents
-
Getting Started
-
Yabby3 Cellular
-
Getting Started
- Introducing the Yabby3
- Yabby3 - FAQ
- Initial Provisioning [Yabby3]
- Sealing the Device [Yabby3]
- Mounting and Installation [Yabby3]
- SIM Cards and Data Usage [Yabby3]
- Default Tracking Parameters - [Yabby3]
- Yabby3 - Tracking Modes
- Changing the Update Rate - [Yabby3]
- Critical Parameters - [Yabby3]
- Yabby3 - Default I/O Mappings
- Documents
- Batteries
-
Configuration
- Scheduled Uploads - Yabby3
- Recovery Mode - Yabby3
- Upload Timeouts - Network Registration Strategy [Yabby3]
- GPS Settings - [Yabby3]
- Yabby3 - Accelerometer Wakeup Thresholds
- Tip Detection and Rotation Counting - [Yabby3]
- High-G Impact Detection - [Yabby3]
- Inactivity Monitoring/Timer [Yabby3]
- Set up a Connector - [Yabby3]
- Yabby3- Geofence Downloads
- Sending Test Data - [Yabby3]
- Using Tip Detection for Tamper detection [Yabby3]
- Movement Detection with No GPS Locations [Yabby3]
- Run Hour Monitoring - Yabby3
- Troubleshooting
-
Yabby GPS & Yabby Wifi
- Yabby Cellular GPS & WiFi - Getting Started
- Yabby GPS FAQ
- Yabby Cellular LED Behaviour
- Yabby Cellular GPS Battery Life Estimate Calculator
- Yabby Cellular Default IO Mappings
- Yabby Cellular Wifi Battery Estimate Calculator
- Yabby GPS Firmware Release Notes
- Yabby Wi-Fi Firmware Release Notes
- Yabby WiFi Location Billing on TG (TG Wifi Lookup Fees)
- Yabbys - Technical Drawing
- Yabby Livestock Housing Technical Drawing
- Yabby GPS Certifications
- Yabby Cellular GPS - Product Change Notifications
- Yabby Cellular Wi-Fi - Product Change Notifications
- Yabby Wi-Fi FAQ
-
Getting Started
-
Yabby3 LoRaWAN®
-
Yabby 3 LoRaWAN®
- Yabby 3 LoRaWAN® Configuration and Usage Guide
- Yabby 3 LoRaWAN® Provisioning Tool
- Yabby 3 LoRaWAN® Integration
- Yabby 3 LoRaWAN® Battery Life Estimate Calculator
- Decoding the Yabby 3 LoRaWAN® Uplink
- Encoding the Yabby 3 LoRaWAN® Downlink
- Simulating the Yabby 3 LoRaWAN® Uplink
- Yabby 3 LoRaWAN® LED Behaviour
- Yabby 3 LoRaWAN® Firmware Release Notes
-
Yabby 3 LoRaWAN®
-
Location Engine
-
General
- The Location Engine - Key Concepts
- Edge Device - Location Scanning and Lookup Parameters
- Forward Edge Device Data to my Endpoint (Cellular)
- Location Engine Lookup Settings
- Edge Device GNSS 'Combo Scan'
- Location Engine Billing
- Do I have to use the Location Engine with my Edge Devices?
- View Forwarder Logs
-
General
-
Telematics Guru
- Getting Started
- Billing
- White Labelling & Portal Customisation
- Creating, Editing and Managing User Accounts
- Live View
- Trip History + LogBooking
- Mobile App
- User Guides
-
Alerts
- Getting Started - Alerts
- Alerts - Set up an Alert with the Wizard
- Telematics Guru - Alert Configuration Examples
- Events vs Alerts
- Panic/Duress Alert on Telematics Guru
- How do I Activate a Movement Alert?
- Create Alerts on Analogue Values
- Telematics Guru - Alert Token Definitions
- Why was my Alert delayed?
- Set up SMS alerts
- Duration Condition for Alerts
- Alert Notifications through WebHooks
- Alert on Live View/Signal Duress - Telematics Guru
- Alert and Report on the First Trip of the Day
- Reports
- BLE® Tags
- Battery Management
- TG Troubleshooting
- Third Party Devices
- Security
- Checklists (Pre-Start)
- Run Hours, Odometer and Maintenance Schedules
- Destination Dispatching
- Speed Monitoring + Driver Behaviour
- Geofences
- Admin
- Route Deviation
- Information for Partners
-
Getting Started
- Global Device Information
-
General Troubleshooting
- Troubleshooting - Devices Not Connecting
- Common Reset Reasons
- Cellular Reception Troubleshooting
- Troubleshooting - Battery Problems
- Why are digital input changes not showing on the server straight away?
- GPS Age and Invalid Fixes
- Troubleshooting - Proactive Monitoring
- (FAQ) Upload Delay (Latency) after a network error
- Contact Support
- Device Profile Counters
- Common Configurations
-
Guides
-
Solutions
- Alert on After Hours Movement
- Yabby - How to set up Man Down Alerts
- Monitoring Door Open/Close with a Reed Switch
- Duress Buttons and Pendants
- Driver Fatigue Alerts
- Speeding On Device
- Scheduled Uploads
- Proof of Service - Renting Assets
- Door and Gate Movement Detection with the Yabby/Oyster2
- Cell Tower Fallback
- Boat Tracking with Battery Powered Devices
- Hard-Wired Devices - Alert on unauthorized movement
- Cold Chain Monitoring
- Accident Detection & High G events
- Scheduled Maintenance & Run Hours
-
Solutions
- Bluetooth® Tags, Sensors and Scanners
-
LoRaWAN®
-
General
- SensorData/SensorNode Overview of Operation
- DM LoRaWAN™ Default Application EUI's (AppEUI)
- IoT Devices - Schedules
- LoRaWAN® Overview
- LoRaWAN® Config Cable
- IoT Devices - Analogue Input
- Which LoRaWAN® Spec does DM comply with?
- IoT Devices - Digital Inputs
- LoRaWAN® Frequency Plans And Class
- Digital Matter LoRaWAN® stack join schedule
- DM I2C Sensors
- Sending Sigfox and LoRaWAN® Downlinks
- Packet Size on LoRa Networks - Structure of Network Pricing
- LoRaWAN® Devices - External Power
- ABP 1.1 Support
- Integration (All IoT Devices)
-
LoRaWAN® Integration
- SensorNode Configuration App
- Connecting the SensorNode to the Config App
- SensorNode: Wiring up a DM Temp/RH sensor
- SensorNode LoRaWAN® - Wiring up a DM Temperature sensor
- SensorNode - Digital Input Setup
- SensorNode LoRaWAN® Firmware Release Notes
- SensorNode LoRaWAN® - Configuration and Usage Guide
- Connecting to Telematics Guru over Actility
- Using Integration Documents to Create a Downlink String
- LoRaWAN Integration - Telematics Guru
- Connecting to Telematics Guru over Senet
- Connecting to Telematics Guru over Helium
- Connecting to Telematics Guru over Hiber Mission Control
- Connecting to Telematics Guru over MachineQ
- Setup devices on The Things Network (v3)
- Forward LoRaWAN (non-Edge) device data to Telematics Guru via TTN (v3)
- Yabby LoRaWAN®
-
SensorData LoRaWAN®
- SensorData LoRaWAN® - Configuration and Usage Guide
- SensorData LoRaWAN® - Configuration App
- SensorData - SDI-12
- SensorData - Wiring up I2C Sensors
- SensorData LoRaWAN® - LoRaWAN® Setup
- SensorData Housing Tech Drawing
- SensorData Housing Tech Drawing
- SensorData LoRaWAN® Firmware Release Notes
- SensorData Certifications
-
G62 LoRaWAN®
- G62 LoRaWAN® Configuration and Usage Guide
- G62 LoRaWAN® Wiring Harness Diagram
- G62 LoRaWAN® Integration Document
- G62 LoRaWAN® Internal LED Behaviour
- G62 LoRaWAN® Firmware Release Notes
- G62 LoRaWAN® Config App Download
- G62 LoRaWAN® Digital Output Functionality
- G62 LoRaWAN® Uplink Decoder
- G62 LoRaWAN® On-Board Odometer
- G62 LoRaWAN Certifications
-
Guppy LoRaWAN®
- Guppy LoRaWAN® - Configuration and Usage Guide
- Guppy LoRaWAN® Integration
- Introduction to the Guppy LoRaWAN®
- Decoding the Guppy LoRaWAN® Payload
- Guppy LoRaWAN® Configuration Application
- LoRaWAN® Overview
- Connecting the Guppy to TG via The Things Network
- Connecting the Guppy to Telematics Guru over Actility
- Guppy LoRaWAN® Python Payload Decoder
- Guppy LoRaWAN® Firmware Release Notes
- Guppy LoRaWAN®- Tilt / Static Angle Output Examples
- Guppy Tilt - Small Changes from Vertical
- Guppy Input Voltage Range
- Guppy - Reporting Tamper
- Guppy LoRaWAN Certifications
-
Oyster LoRaWAN®
- Oyster LoRaWAN® - Configuration and Usage Guide
- Oyster LoRaWAN® Config App
- Oyster LoRaWAN® Integration
- Oyster LoRaWAN® Battery Life Estimate Calculator
- Oyster LoRaWAN® - Adjusting GPS Fix Settings
- Decoding the Oyster LoRaWAN® Payload
- Oyster LoRaWAN® Battery Recommendations
- Oyster LoRaWAN® - LED Behaviour
- Oyster LoRaWAN® Firmware Release Notes
- Oyster LoRaWAN Certifications
-
General
-
SigFox
-
General
- Provisioning for Telematics Guru on the Sigfox Backend
- Sigfox - Configuration and Usage Guide
- Sigfox - How to Change Settings?
- Oyster Sigfox Config App
- Sigfox - Periodic Only Updates
- Create Device on Sigfox Backend
- Oyster Sigfox: In Trip vs. Out Of Trip
- Sigfox - missed GPS updates! Why?
- How often are Sigfox Downlinks requested?
- Upgrading the Sigfox Config App
- Getting a Sigfox device online
- Oyster Sigfox Default Settings
- Oyster Sigfox Firmware Release Notes
- Oyster Sigfox Downlink FAQs
- SigfoxInvalid PAC Code
- Finding Deleted Device on Sigfox Back-end
- Documents
-
Integration
- Oyster Sigfox Integration (Complete Protocol)
- Decoding the Oyster Sigfox Payload: Examples
- Decoding The Oyster Sigfox Payload - Javascript example code
- Decode Sigfox Uplink Payload using your Browser
- Changing Oyster Sigfox Parameters: Implementing the Downlink Payloads
- Position data - from Sigfox and from the Device
- Oyster Sigfox - Common Integration Pitfalls
- Oyster Sigfox on Telematics Guru
- SensorData Sigfox
- Batteries
-
General
- Sensors
-
Falcon and Eagle
- General
-
Eagle
- Eagle - Getting Started
- Eagle Battery Recommendations
- Eagle - Firmware Release Notes
- Eagle Bluetooth Firmware Release Notes
- Eagle - FAQ
- Eagle - Technical Drawing
- Eagle - Wiring up a DM Temperature Sensor
- The Eagle - Soil Moisture Probe Setup
- Eagle: SDI-12 configuration and compatibility
- SDI-12 samples
- Eagle Certifications
- Measuring 4-20mA Current Loop Signals with an Analog Input
- Eagle - Product Change Notifications
- Wired Sensing Mode
-
Falcon
- Falcon - Getting Started
- Falcon - Wiring in DM I2C Sensors
- Falcon - FAQ
- Falcon Cellular - Battery Recommendations and Estimates
- Falcon - Battery Capacity Estimate and Low Battery Flag
- Configuring Analog Thresholds
- Falcon Cellular - Configuring Wi-Fi Lookups
- Falcon Firmware Release Notes
- Falcon - Technical Drawing
- Falcon Cellular - Turn by Turn Tracking
- Falcon Certifications
- Falcon - Temperature Readings in Telematics Guru
- Falcon Cellular - How to setup analogue sampling
- Falcon - Product Change Notifications