Screw Sizes and Recommended Torque
Written by Matthew Clark-Massera
Updated at November 13th, 2024
The table below details the recommended screw sizes and torque for Digital Matter device housings. Guides on how to properly seal devices can be found under the specific device's getting started guide.
| Device | Screw Size | Recommended Torque |
| Barra Core/Edge/GPS | 2.5mm x 8mm | 0.7 Nm |
| Eagle | 3.5mm x 12mm | 0.7 Nm |
| Falcon | 3.5mm x 12mm | 0.7 Nm |
| G62 | 3.5mm x 20mm | 0.7 Nm |
| G70 | 3.5mm x 20mm | 0.7 Nm |
| Guppy | 2.5mm x 6mm | 0.7 Nm |
| Hawk | 3.5mm x 12mm | 0.7 Nm |
| Oyster/Oyster 2/Oyster 3 | 3.5mm x 12mm | 0.7 Nm |
| Oyster Edge | 2.5mm x 12mm | 0.7 Nm |
| Oyster3 LoRaWAN | 3.5mm x 12mm | 0.7 Nm |
| Remora/Remora 2/Remora 3 | 3.5mm x 12mm | 0.7 Nm |
| Sensordata | 3.5mm x 12mm | 0.7 Nm |
| Sensornode | 3.5mm x 12mm | 0.7 Nm |
| Yabby3 | 2.5mm x 8mm | 0.7 Nm |
| Yabby Edge Cellular | 2.5mm x 8mm | 0.7 Nm |
| Yabby Edge LoRaWAN | 2.5mm x 8mm | 0.7 Nm |
| Yabby GPS/Wi-Fi | 2.5mm x 8mm | 0.7 Nm |
| Manta Fusion | 2.5mm x 8mm | 0.7Nm |