Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Digital Matter Site
  • Contact Us

SensorNode LoRaWAN® - Wiring up a DM Temperature sensor

Written by Matthew Clark-Massera

Updated at January 27th, 2023

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Contact Support
  • Home
  • Devices
  • LoRaWAN®
  • SensorData and SensorNode LoRaWAN®

DM produces I2C temperature probes. These can be connected to the SensorNode to read temperature at regular intervals.

DM temperature probes use the following wiring colours:

  • Red = Positive - connect to 3.3V
  • Brown = Clock - connect to SCL
  • Orange = Data - connect to SDA
  • Black = Ground - connect to GND

New DM Temp Sensor:

In 2018 we introduced a new temperature sensor that allows you to set the address to Address 1 or Address 2:

  • Address 1 (DM Temp Sensor 1): Green - connect to ground
  • Address 2 (DM Temp Sensor 2): Green - connect to 3.3V
  • The rest of the wiring stays the same

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Connecting the SensorNode to the Config App
  • SensorNode: Wiring up a DM Temp/RH sensor
  • SensorNode Configuration App

Subscribe to Partner News

Subscribe to our mailing list to receive Digital Matter news, product and tehnical updates, and more.

Subscribe

Copyright © Digital Matter . All Rights Reserved.

Privacy Contact Support

Knowledge Base Software powered by Helpjuice

Expand