Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Digital Matter Site
  • Contact Us

SensorNode: Wiring up a DM Temp/RH sensor

Written by Matthew Clark-Massera

Updated at January 27th, 2023

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Contact Support
  • Home
  • Devices
  • LoRaWAN®
  • SensorData and SensorNode LoRaWAN®

DM produces I2C temperature and relative humidity (RH) sensors. These are also known as "ambient sensors".

These can be connected to the SensorNode to read temperature and/or RH at regular intervals.

DM Temp/RH sensors use the following wiring colours:

  • Red = Positive - connect to 3.3V
  • Brown = Clock - connect to SCL
  • Green = Data - connect to SDA
  • Black = Ground - connect to GND
  • Purple = Not used.

To schedule this on the device, create a schedule item called "DM Ambient Sensor":

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • SensorNode Configuration App
  • Connecting the SensorNode to the Config App

Subscribe to Partner News

Subscribe to our mailing list to receive Digital Matter news, product and tehnical updates, and more.

Subscribe

Copyright © Digital Matter . All Rights Reserved.

Privacy Contact Support

Knowledge Base Software powered by Helpjuice

Expand