Applies to:

• Hawk Pro
• Hawk Lite

Many people want to connect their Hawks to external power, and send an alert/upload when the device is removed from this power.

If you need assistance with wiring in external power, please see:

• Hawk Power Options

Getting alerts based on power being removed is very easy!

Hawk Pro

Simply configure the above parameter, and get it to Log + Upload when the input goes active or inactive, just depending on what you are after.

You should see the device uploading immediately when external power is removed.

Hawk Lite

The Hawk Lite is not intended to be connected to external power, therefore all you can do is monitor the battery voltage.

You can set this to be whatever you like, and use the Digital Input Monitor to perform actions depending on the threshold you set above.