Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Digital Matter Site
  • Contact Us

G62 Cellular Firmware Release Notes

Written by Matthew Clark-Massera

Updated at October 9th, 2023

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Contact Support
  • Home
  • Devices
  • Cellular
  • Hard-Wired
  • G70 Cellular
  • G62 Cellular

Subscribe To Updates

Subscribe to our technical newsletter to be notified of bug fixes and firmware updates

v2.15 / 3.15 Bugfix for runtime incrementation
v2.13 / 3.13 Improved run hour incrementation
v2.12 / 3.12 Reduced the risk of the 4G modem entering an unrecoverable fault state
v2.11 / 3.11 Fix for repeated "Modem turn off failed" issue
v2.10 / 3.10

Added the option to disable the supression of GPS wander for heartbeats

The GPS fix timestamp is now updated for heartbeats

Odometer optimisations

v2.9 / 3.9 Aiding data HTTP fix
v2.8 / 3.8 Verizon upload restrictions eased (no longer 5 minute batches)
v2.7 / 3.7

Added option to poll iButton

Added geofence download async message

Relaxed minimum heartbeat period

The Idle monitor can now monitor accelerometer movement in addition to GPS speed to determine the state (useful for heavy machinery, like excavators, which can be performing work on the spot)

Driver ID can now be used to temporarily disable server initiated immobilisation (useful when out of coverage)

v2.6 / 3.6 Fixed critical bug in 2.5
v2.5 / 3.5

Added third party server version messaging support

Added GPS satellite count and signal strength filter for higher position certainty

Compatibility for networks that don't support ePCO

Geofence support for third party servers

Added oem server whitelisting

v2.4 / 3.4

Added input monitor

Added backup/fallback admin parameters

v2.3 / 3.3

Fixed support for APNs with authentication

New modem maintenance release for 3.x (6 MB download)

v2.2 Reverted default Telstra APN to blank
v2.1 / 3.1 Added immobiliser with expiry feature via Async message
v3.0 Enabled modem maintenance release update (6 MB download)
v2.0

Network Profile support

SARA-R410M-02B 5.08 support

v1.14

Added geofence downloads

Added inactivity timer

Added odometer and run hours

v1.13 Support for incremental modem firmware downloads
v1.12 Added modem firmware update revision 3, for units deployed for 8-12 months
v1.11 Added modem firmware update revision 2, for units deployed for 4-8 months
v1.10 Increased modem firmware download timeout, and limited to one install attempt per boot
Set Telstra 4G sims to Cat-M1 only
v1.9 4G modem firmware updated to SARA-R410M-02B L0.0.00.00.05.06 A.02.01
v1.8 Added temporary workaround for Ublox 4G modem issue. Permanent solution in progress.
v1.7 Fixed Async Messages occasionally causing disconnects
v1.6

Fixed SMS reading bug on 2G

Support for SIM stored SMS configuration on 4G.

v1.5 Fixed driver ID bug
v1.4 Added driver id reporting
v1.3 2G support
v1.2 Support for new board revision
v1.1 First Release
release notes mobile firmware g62 firmware updates

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • G62 - Getting Started
  • G62 Harness Definition
  • G62 Wiring Diagrams
  • G62 - Analogue input serial range (Deprecated)

Subscribe to Partner News

Subscribe to our mailing list to receive Digital Matter news, product and tehnical updates, and more.

Subscribe

Copyright © Digital Matter . All Rights Reserved.

Privacy Contact Support

Knowledge Base Software powered by Helpjuice

Expand