LED Behaviour
Written by Matthew Clark-Massera
Updated at July 15th, 2024
Battery powered devices will flash the LED in the following ways:
| Behaviour | Information |
| Off | If the LED is not on at all, it is likely that the battery is flat, or that the device is asleep. |
| From power-on-reset, the LED flashes for duration of start-up connect, fix, connect. Or until 10 min have passed. |
After a power-on-reset of the device, the LED will flash slowly (0.5 Hz), twice.
It will continue to flash until it has completed the following start-up sequence:
If the connections are not successful, this will timeout after 10 minutes. |
| After first sleep - off | After the start-up sequence has completed (connect, fix, connect) or after 10 min, the LED will be switched off. No LED flashes will occur, until a power-on-reset |
| Using the Provisioning Tool - LED stays on | The LED will stay on (solid) while the Provisioning Tool is being used until the device is power cycled. |