Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Digital Matter Site
  • Contact Us

Sealing the Device [Yabby3]

Written by Matthew Clark-Massera

Updated at January 31st, 2023

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Contact Support
  • Home
  • Devices
  • Cellular
  • Battery Powered
  • Yabby3 Cellular
  • Getting Started

The Yabby3 has an IP68 and IK06 rated housing. The device must be sealed carefully to achieve the IP68 rating.

  1. Ensure that the clear silicon seal is in good condition, is lying flat, and is not fouled by any plastic debris or other material.
  2. Close the housing, and gently squeeze it shut. Foam on the lid will compress against the batteries, holding them firmly in place.
  3. Tighten the 6 screws to a uniform tightness. On the first assembly, the screws may be quite stiff.
    1. The screw heads are Posi-Pan head. As such a Posidriv bit should be used. A Phillips screwdriver can strip the threads.
    2. The screws are a thermoplastic screw: 2.5mm x 8mm (BN82428).
    3. If you are after a stainless steel variant, the product code to source is BN82429.
  4. The silicone seal is what is responsible for maintaining the integrity of the housing. So when sealing, we are looking for:
    1. Even pressure along all points of the seal
    2. A uniform gap between the housing lid and base (approx. 1mm)
  5. If you wish to replace the batteries and open the housing, be sure to check that the silicon seal is in good condition before closing the housing again.
yabby3 sealing yabby

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Initial Provisioning [Yabby3]
  • Yabby3 - FAQ
  • Introducing the Yabby3

Subscribe to Partner News

Subscribe to our mailing list to receive Digital Matter news, product and tehnical updates, and more.

Subscribe

Copyright © Digital Matter . All Rights Reserved.

Privacy Contact Support

Knowledge Base Software powered by Helpjuice

Expand