Support Home Portal Log in

Configuring IOs

Digital Inputs Introduction [G120]
The G120 has 1 x Ignition Digital Input and 6 x Digital Inputs with configurable pull up/pull down parameters. These inputs detect the voltage at the input,...
Tue, 19 Jul, 2022 at 8:17 AM
Set Up A Panic/Duress Button [G120]
A duress button is an example of a "Dry Contact" device. Dry contact is a synonym for 'no voltage'. Since to detect that the push button...
Tue, 19 Jul, 2022 at 4:29 PM
Monitor a PTO/Fuel Pump [G120]
The G120 has 6 digital inputs represented by the following coloured pins in the 24-wire harness. Digital Input 1: Pin 16 - Pink Digital Input 2: Pin 17 -...
Mon, 25 Jul, 2022 at 10:45 AM
Outputs - General [G120]
The G120 has 2 switched ground digital outputs and 1 switch power output. Switched Ground Digital Outputs Digital Output 1 - Pin 11 - Yellow Digital O...
Thu, 1 Sep, 2022 at 10:15 AM
Connect an External Buzzer/LED [G120]
The G120 can be set to sound buzzers based on various conditions such as: A trip starting, but no driver ID has been scanned - to remind drivers to tag on...
Tue, 19 Jul, 2022 at 3:31 PM
Input Monitor [G120]
The input monitor allows a digital output to be set, or a buzzer to be sounded, based on the state of device digital inputs, and a speed threshold.  Exampl...
Wed, 22 Jun, 2022 at 2:37 PM
Configure Analogue Input [G120]
The G120 has a 0-30V analogue input.  On the 24-Wire harness, this is the Orange/White wire, pin 1.  The analogue input simply measures the voltage at th...
Wed, 13 Jul, 2022 at 2:46 PM
Input Monitor Setup
The input monitor allows a digital output to be set, or a buzzer to be sounded, based on the state of device digital inputs, and a speed threshold.  Exampl...
Thu, 13 Feb, 2020 at 3:20 PM
RS232 Passthrough Mode
The G120 is capable of acting as an intermediate between a server and an RS232 serial connected device, passing along data received via an async message fro...
Thu, 5 Mar, 2020 at 3:38 PM