Support Home Portal Log in

Configuring I/Os

Digital Inputs Introduction - G70
The G70 has 1 x Ignition Digital Input and 3 x Digital Inputs with configurable pull up/pull down parameters. These inputs detect the voltage at the input,...
Mon, 21 Nov, 2022 at 11:11 AM
Set Up A Panic/Duress Button - G70
A duress button is an example of a "Dry Contact" device. Dry contact is a synonym for 'no voltage'. Since to detect that the push butto...
Mon, 21 Nov, 2022 at 11:07 AM
Monitor a PTO/Fuel Pump - G70
The G70 has 3 x Digital Inputs (+1 dedicated Ignition Digital Input). We can use a Digital Input to monitor a secondary bit of equipment on an asset, i.e. s...
Tue, 26 Jul, 2022 at 11:14 AM
G70 - Outputs - General
The G70 has a switched ground Digital Output. This is Pin 8 - Green Wire Switched Ground Outputs Switched ground outputs provide a path to ground when &#x...
Thu, 24 Nov, 2022 at 10:12 AM
G70 - Connect an External Buzzer/LED
The G70 can be set to sound buzzers based on various conditions such as: A trip starting, but no driver ID has been scanned - to remind drivers to tag on....
Thu, 25 Aug, 2022 at 11:03 AM
G70 - Input Monitor
The input monitor allows a digital output to be set, or a buzzer to be sounded, based on the state of device digital inputs, and a speed threshold.  Exampl...
Wed, 12 Oct, 2022 at 9:29 PM
G70 - Configure Analogue Input
The G70 has a 0-40V analogue input.  On the 10-core harness, this is the yellow wire  The analogue input simply measures the voltage at the input.  Gene...
Wed, 13 Jul, 2022 at 2:46 PM
Configure Buzzing on Excessive Tilt - G70
Most Digital Matter devices are fitted with a 3D accelerometer. Our hard-wired range of devices make use of the accelerometer for harsh event detection, acc...
Wed, 26 Oct, 2022 at 11:26 AM
G70 - Configuring Pulse Counting
The G70 can be configured to count pulses on digital inputs - for example to monitor a meter. All 3 Digital Inputs on the G70 for Pulse Counting. Digital In...
Fri, 2 Dec, 2022 at 10:57 AM