Support Home Portal Log in

Configuring IOs

Digital Inputs Introduction - Dart3
The Dart3 has 1 x Ignition Digital Input and 3 x Digital Inputs with configurable pull up/pull down parameters.  These inputs detect the voltage at the inp...
Tue, 17 May, 2022 at 2:58 PM
Set Up A Panic/Duress Button - [Dart3]
A duress button is an example of a "Dry Contact" device. Dry contact is a synonym for 'no voltage'. Since to detect that the push button...
Mon, 14 Mar, 2022 at 3:26 PM
Monitor a PTO/Fuel Pump - Dart3
The Dart3 has 3 x Digital Inputs (+1 dedicated Ignition Digital Input). We can use a Digital Input to to monitor a secondary bit of equipment on an asset, i...
Tue, 15 Mar, 2022 at 6:45 PM
Dart3 - Outputs - General
The Dart3 has 2 x different digital output options available. These are: Switched Ground Output  Most common and widely used for most applications Pin 1...
Mon, 4 Apr, 2022 at 7:46 PM
Dart3 - Connect an External Buzzer/LED
The Dart3 can be set to sound buzzers based on various conditions such as: A trip starting, but no driver ID has been scanned - to remind drivers to tag o...
Mon, 4 Apr, 2022 at 7:45 PM
Input Monitor - Dart3
The input monitor allows a digital output to be set, or a buzzer to be sounded, based on the state of device digital inputs, and a speed threshold.  Exampl...
Wed, 30 Mar, 2022 at 11:51 AM
Configure Analogue Input [Dart3]
The Dart3 has a 0-40V analogue input.  On the 12-way harness, this is the Orange/White wire, pin 6.  The analogue input simply measures the voltage at th...
Wed, 22 Jun, 2022 at 2:59 PM