Support Home Portal Log in

Driver ID + Immobilisation

Dart3 - Driver ID Options
The Dart3 supports a variety of Driver ID options to provide driver behaviour monitoring, access control and logbooking solutions. If a worksite already ha...
Tue, 3 May, 2022 at 11:31 AM
Connecting a DM iButton Reader to the Dart3
The Digital Matter iButton Reader has the following wire colours: Wire ColorFunction Red iButton Signal Line Black Ground Green Green LED (with 1000...
Thu, 8 Sep, 2022 at 5:35 PM
Immobiliser Install - Asset starts after valid Driver ID Scan [Dart3]
Warning! Digital Matter does not advise connecting an immobilization relay to a safety critical system such as the ignition or fuel pump. A starter motor ...
Wed, 12 Oct, 2022 at 9:29 PM
Immobilisation Install - Asset can be immobilised from server [Dart3]
Warning! Digital Matter does not advise connecting an immobilization relay to a safety critical system such as the ignition or fuel pump. A starter motor ...
Wed, 12 Oct, 2022 at 9:29 PM
Connect 1-Wire Keypad to Dart3
The AR0226 1-Wire Keypad is a keypad which can be connected to a DM device where a keypad is required instead of a swipe fob/access card. Some organisations...
Tue, 31 May, 2022 at 1:45 PM
Connect Hikvision Keypad to Dart3
This article shows configuration steps to enable a Hikvision keypad to be read by the Dart3. Consult the keypad manufacturer for detailed technical informat...
Fri, 13 May, 2022 at 2:30 PM
Zilch RFID reader setup
Custom TTL RFID reader integration.  Wiring RFID Reader Wire Connect to Red - VCC/12V 12V power. It has been observed that the Purple Sys Rail out (~...
Thu, 20 Oct, 2022 at 11:45 AM