Support Home Portal Log in

Configuration

Set up a connector - [Oyster3]
In OEM Server, we can create a 'connector' which allows you to send data to your endpoint. We can then Set the Connector on a device, and data fro...
Wed, 23 Feb, 2022 at 5:16 PM
Upload Timeouts - Network Registration Strategy [Oyster3]
A failed upload uses up to 20 times the power of a successful upload. This is because a failed upload scans the bands for 3 minutes (registration timeout), ...
Fri, 25 Feb, 2022 at 2:29 PM
Sending Test Data - [Oyster3]
Often when provisioning devices, or when developing a Third-Party platform, it is useful to be able to get the device to upload more frequently, so that dat...
Tue, 22 Feb, 2022 at 12:04 PM
Scheduled Uploads - Oyster3
Scheduled uploads allows heartbeats to be sent at up to 6 specific times during the day. Without scheduled uploads enabled, heartbeats are just sent on a p...
Tue, 3 May, 2022 at 8:53 AM
Geofence Downloads - Oyster3
The Oyster3 allows geofences to be downloaded from the server onto to the device. This allows for a wide range of applications. Some of them relevant to the...
Tue, 22 Mar, 2022 at 4:22 PM
High-G Impact Detection - [Oyster3]
High-G event detection is supported by the Oyster3.  When enabled, the Oyster3 accelerometer will detect High-G events exceeding the specified force and du...
Fri, 25 Feb, 2022 at 2:55 PM
Run Hour Monitoring - Oyster3 Cellular
Run hours is the total number of hours that an asset has been operating. On hard wired devices, this task is achieved by wiring the ignition line on the dev...
Mon, 21 Feb, 2022 at 4:51 PM
Recovery Mode - Oyster3
Recovery mode can be used to help recover a stolen asset.  When set, a device reports more frequently, and begins 'live tracking' when on the mov...
Tue, 24 May, 2022 at 12:54 PM
GPS Settings - [Oyster3]
The Oyster3 has various parameters which determine it's behaviour when acquiring GPS fixes: Timeouts (how long without getting a fix before giving up...
Fri, 25 Feb, 2022 at 3:18 PM
Tip Detection and Rotation Counting - [Oyster3]
Tip Detection detection and Rotation Counting are supported by the Oyster3.  The tip event is useful for detecting the emptying of containers such as skip...
Mon, 16 May, 2022 at 10:46 PM