Digital Matter Support

Generic Wired Devices

Speeding - Dart On-Device Setting
Please see the Main article on on-device speeding here
Mon, 2 Dec, 2019 at 4:24 PM
Dart - Install and Setup a Duress Button
The Dart has digital inputs that can be setup to be used with a duress button input. First step is to source a suitable button. There are lots of differ...
Thu, 18 Jul, 2019 at 12:57 PM
Connect an iButton Reader to the G62
The Digital Matter iButton Reader has the following wire colours:        Red     iButton Signal Line Black GND Green Green LED Brown Red LED Yellow LED ...
Tue, 28 Aug, 2018 at 3:29 PM
G62 - Setup for Periodic Only/Heartbeat Only
The G62 will track trips by default. It will start a trip based on the ignition (white) wire going positive, or based on GPS movement past the trip start th...
Tue, 3 Sep, 2019 at 7:47 PM
G62 - Input Monitor Setup
Please visit the System Parameters - Input Monitor Setup in the System Parameters Folder here You can also see the product page on for...
Thu, 13 Feb, 2020 at 3:20 PM
Connect an iButton Reader to the Dart
Before you start: Ensure your Dart is iButton capable. This should be on serial numbers newer than 122000 If you are using an LED, ensure there is a res...
Mon, 15 Jul, 2019 at 2:49 PM
Setting up Secondary Run Hours
Telematics Guru can keep track of secondary run hours. For a description of primary run hours and odo readings, click here. Secondary run hour functiona...
Mon, 15 Jul, 2019 at 3:02 PM
Bolt OBD II - Overview of Operations
Emulated or Run Detect? Digital Matter devices revolve around the concept of 'a Trip' for their tracking, and there are several ways you can comm...
Thu, 4 Jul, 2019 at 4:38 PM
Example: Setting up Refrigeration Truck Monitoring
This is an example of a use-case for the G100 in monitoring refrigeration trucks. Setup is the same for a Dart.  The truck is required to be tracked as ...
Mon, 9 Apr, 2018 at 3:45 PM
G62 - Buzzer Wiring Diagram
Buzzer Wiring Diagram Note: You could connect the +ve wire of the buzzer to ignition to setup the buzzer to only buzz when the ignition is on. If th...
Mon, 23 Sep, 2019 at 9:45 PM