General
Due to the low power/low data bandwidth nature of the device, the timing of samples is grouped into 'schedules'. Each schedule can have up to 4 it...
Fri, 28 Sep, 2018 at 1:14 PM
Out of the box, the SensorData/SensorNode is not configured to take any readings, and must be first configured by setting up schedules. Currently, there can...
Fri, 28 Sep, 2018 at 1:16 PM
See attached run down on LoRaWAN network architecture.
Wed, 29 Apr, 2020 at 2:02 PM
Digital Matter Sigfox and LoRaWAN devices require a configuration cable in order to program parameters, set LoRaWAN regions, and read device information (Ap...
Tue, 6 Apr, 2021 at 10:25 AM
The SensorData and SensorNode have analogue inputs available - consult the Datasheet for the number available and input range. Outputs on the device ca...
Fri, 17 May, 2019 at 11:15 AM
The Oyster supports the LoRaWAN 1.0.2, 1.0.3, and 1.1 specifications. Please note however that at this time (Mar 2019), most network servers do not have co...
Wed, 29 Apr, 2020 at 2:03 PM
Digital inputs are available on the SensorData and SensorNode. These can be used to monitor the state of external devices or switches, or to count pulses - ...
Mon, 28 Oct, 2019 at 6:06 PM
The Digital Matter devices currently support the following LoRaWAN™ frequency plans. The Regional Parameter Specification version number from the LoRa Allia...
Wed, 29 Apr, 2020 at 2:03 PM
Digital Matter devices, based on LoRaWAN™ technology, will attempt to join a LoRaWAN network. The join is attempted when they are set to Over The Air Activa...
Wed, 29 Apr, 2020 at 2:04 PM
Digital Matter can supply a I2C Temperature Probes, and a Temperature/Humidity (Ambient) Sensor. For specifications and a downloadable PDF datasheets, see...
Mon, 5 Apr, 2021 at 11:36 PM