Digital Matter Support

Documentation and How To

Bluetooth® Questions - Webinar 4th Dec 2019
Below are some questions asked during the Bluetooth® webinar on 4th Dec 2019.  Recording link: https://youtu.be/STA7pFQna7U Questions 3rd Party ...
Thu, 30 Apr, 2020 at 8:02 AM
Active vs Passive Bluetooth® Scanning
Bluetooth® scans can either be passive or active. When passively scanning, a device will only listen to Bluetooth® devices, quietly collecting data about it...
Thu, 30 Apr, 2020 at 7:57 AM
Bluetooth® Long Range
Bluetooth 5 introduced two new technologies, one for extending the range of Bluetooth® at the expense of data rate (LE Coded - henceforth referenced as &quo...
Thu, 30 Apr, 2020 at 7:58 AM
Integrating Tags
Can you integrate Custom Bluetooth® Tags? If you require a tag to be integrated into Telematics Guru or require a complex device integration, then contact ...
Thu, 30 Apr, 2020 at 8:03 AM
Choosing Bluetooth® Scan Length
When choosing the scan length for your Bluetooth® device you are balancing the power usage and accuracy. If the scan is too short you may miss nearby tags b...
Thu, 30 Apr, 2020 at 8:04 AM
Tag Filtering
Digital Matter devices filter out the tags you require from all the Bluetooth® noise in the background. However sometimes this isn't enough, especially...
Thu, 30 Apr, 2020 at 9:15 AM
'Default' GPS Position
The Remora2 (FW 2.11 and above) and the Eagle (FW 2.1 and above) have the option to set a "default" GPS position.  The GPS location can be e...
Thu, 30 Apr, 2020 at 9:20 AM
3rd Party Bluetooth® Tag Support
In general, it is possible for us to integrate tags that 'beacon'. Integration effort (cost) is relatively low. Beaconing refers to the fact that...
Thu, 30 Apr, 2020 at 9:16 AM
Advanced Scanning Parameters
When scanning for Bluetooth® devices there are many options to consider. Should the device actively or passively scan? What technology should be used? These...
Thu, 30 Apr, 2020 at 9:17 AM