How To Guides

Remora - tracking Odometer accurately
The Remora can be used to track the distance that an asset has travelled. For example trailers. The limitation is that GPS points are logged on a time bas...
Wed, 29 Aug, 2018 at 6:46 PM
How To: Increase the tracking rate when the Remora is In Trip
When the Remora moves it will start a 'trip'. When in a trip the Remora will by default log a GPS position every 2 minutes, and connect and u...
Mon, 8 Apr, 2019 at 3:52 PM
Tamper Detection
The Remora can be fitted with an HES Magnetic Tamper Detection board. This allows the device to wirelessly detect that it has been detached from the asset....
Mon, 8 Apr, 2019 at 3:34 PM
Remora - using the tamper input for a switch
The three pins on the tamper Hall sensor connector are: · Red – 3V3 output, with on-board 10Ω series resistor · White – Tamper input, drive to gro...
Wed, 20 Mar, 2019 at 3:45 PM
Remora - Battery Low Indicator
The Remora reports 3 different battery level statistics: 1. The battery voltage (sampled at very light load) 2. A battery good digital input, which tr...
Tue, 20 Aug, 2019 at 10:41 AM