How To Guides

Iridium Parameter Editting
The logging of Out Of Band Iridium Data is controlled by a System Parameter Block.  Read this document to understand the Iridium operation. This article...
Thu, 18 Oct, 2018 at 3:34 PM
G100 Iridium Setup and Data Document
See the attached PDF
Thu, 7 Dec, 2017 at 1:56 PM
Iridium Setup
For the G100 3G + Iridium to operate correctly, the following must be in place. To troubleshoot Iridium issues, first check this list. The Iridium mode...
Thu, 18 Oct, 2018 at 3:06 PM
Example: Setting up Refrigeration Truck Monitoring
This is an example of a use-case for the G100 in monitoring refrigeration trucks. Setup is the same for a Dart.  The truck is required to be tracked as ...
Mon, 9 Apr, 2018 at 3:45 PM
G100 Buzzer Setup
The G100 has an internal buzzer, as does the DMCAN RFID reader.  Note in firmware, setting the 'buzzer' controls: a) The Internal Buzzer b) ...
Wed, 4 Jul, 2018 at 3:38 PM
G100 Lone Worker Alarm
Lone worker is only enabled if the following conditions are met: 1) The lone worker settings have been enabled  2) The device is not in trip (so ignition ...
Tue, 18 Sep, 2018 at 4:27 PM