How To Guides

Dart Driver ID Options
The latest Darts supports two forms of Driver ID input: (Default) DM RFID Reader: the reader plugs into the Molex connector and reads 125kHz RFID card...
Tue, 2 Apr, 2019 at 3:25 PM
Speeding - Dart On-Device Setting
The "Speeding" section of the Dart system parameters allows a maximum speed Threshold (km/h) to be stored on the device. If the Threshold speed...
Wed, 20 Mar, 2019 at 3:39 PM
Dart - Install and Setup a Duress Button
The Dart has digital inputs that can be setup to be used with a duress button input. Step 1 - source a suitable button. There are lots of different type...
Wed, 20 Mar, 2019 at 3:39 PM
Connect an iButton Reader to the Dart
Before you start: Ensure your Dart is iButton capable. This should be on serial numbers newer than 122000 If you are using an LED, ensure there is a res...
Tue, 2 Apr, 2019 at 3:17 PM
Setting up Secondary Run Hours
Telematics Guru can keep track of secondary run hours. For a description of primary run hours and odo readings, click here. Secondary run hour functiona...
Mon, 8 Apr, 2019 at 4:01 PM