Common Configurations
To provide finer control of upload power use for battery powered devices, 3 settings are exposed in the System Parameters: Network registration timeout ...
Thu, 2 Apr, 2020 at 10:03 AM
Many of our devices can be set to sound buzzers based on various conditions such as: A trip starting, but no driver ID has been scanned - to remind driver...
Tue, 10 Nov, 2020 at 4:45 PM
TABLE OF CONTENTS Background Digital Input Specs Bias Resistors Set Up Example - Panic Button Example - Monitor a PTO/Pump/Engine Buzz on Active/Ina...
Wed, 11 Nov, 2020 at 1:24 PM
Digital Matter devices have a few different digital output options available. These are: Switched Ground Outputs (most common and widely used across the r...
Thu, 13 Aug, 2020 at 3:33 PM
Introduction This article is to explain some general concepts around GPS, as well as the behaviour and available settings specific to Digital Matter device...
Wed, 17 Jun, 2020 at 10:36 PM
Driver Behaviour is an important safety and cost saving measure. Driver behaviour alerts and reports help with Safety and Compliance, and enable you to get ...
Tue, 13 Oct, 2020 at 11:53 AM
The Inactivity Timer is a simple timer that starts when a device ends it's trip. Once the configured time period has elapsed, a specified digital input...
Thu, 2 Jul, 2020 at 2:38 PM
Recovery Mode is a one-touch feature available on our cellular devices. It is designed to set the device into "live tracking" where it reports mor...
Mon, 3 Aug, 2020 at 9:32 AM
Often when provisioning devices, or when developing a 3rd party platform, it is useful to be able to get the device to upload which allows: Any pending fi...
Wed, 24 Jun, 2020 at 3:18 PM
Jostle mode tracking relies on the accelerometer sensing movement to start a trip. It's available as an option on the Remora/Remora2, Oyster/Oyster2 an...
Fri, 19 Jun, 2020 at 3:13 PM