Guppy LoRaWAN®
The Guppy LoRaWAN provides a number of configurable parameters, to allow its behavior to be tailored to specific applications. Factors affecting the configu...
Thu, 11 Nov, 2021 at 11:01 PM
The attached document describes all of the uplink and downlink message requirements for working with a Guppy LoRaWAN device. The downlink messages are n...
Wed, 29 Apr, 2020 at 2:12 PM
This article is meant to be an introduction to the Guppy LoRaWAN device. At a high level, the article discusses what it is and how to use it. You're goi...
Wed, 29 Apr, 2020 at 2:12 PM
You can find the full payload specification and example decoder here. This decoder is written in Java Script and may be freely used as example code. To ...
Wed, 29 Apr, 2020 at 2:12 PM
Please download and install the Windows application from here: https://www.oemserver.com/tools/GuppyLoRaWAN/ConfigTool/setup.exe
Wed, 29 Apr, 2020 at 2:13 PM
See attached document for an overview of the LoRaWAN network architecture.
Wed, 29 Apr, 2020 at 2:13 PM
The process for connecting the Guppy to TG via TTN is the same as per the Oyster, aside from the destination URL. See here: Oyster - Connecting to Telemati...
Thu, 14 Mar, 2019 at 4:33 PM
The process for connecting the Guppy to TG via Actility is the same as per the Oyster, aside from the destination URL. See here: Oyster - Connecting to TG ...
Thu, 23 Aug, 2018 at 7:11 PM
See attached Python Decoder for the Guppy Payload. Acknowledgements: This decoder was written by Biswajit Sahu Disclaimer: As this was not produced...
Wed, 29 Apr, 2020 at 2:13 PM
v2.3 - Added 1.0.2rB version of region US915 - Changes to test mode for LCTT compatibility - Fixed empty uplink on port 8 at startup - Added AS923-2/3 f...
Fri, 11 Sep, 2020 at 5:55 PM