LoRaWAN® Integration

SensorNode Configuration App
Download the SensorNode config app here: https://www.oemserver.com/tools/SensorNodeLoRaWAN/ConfigTool/setup.exe
Tue, 6 Mar, 2018 at 9:03 AM
Connecting the SensorNode to the Config App
The SensorNode only detects the config cable at power on (inserting batteries).  Batteries may need to be removed for a good 30-60s before it resets.  An ...
Thu, 16 May, 2019 at 2:43 PM
SensorNode: Wiring up a DM Temp/RH sensor
DM produces I2C temperature and relative humidity (RH) sensors. These are also known as "ambient sensors". These can be connected to the SensorNo...
Thu, 16 May, 2019 at 3:13 PM
SensorNode LoRaWAN® - Wiring up a DM Temperature sensor
DM produces I2C temperature probes. These can be connected to the SensorNode to read temperature at regular intervals. DM temperature probes use the foll...
Wed, 29 Apr, 2020 at 2:06 PM
SensorNode - Digital Input Setup
General Setup The SensorNode has 2 digital inputs. These are general purpose on off inputs. They have configurable pull up/down resistors, to allow them to...
Mon, 28 Oct, 2019 at 5:29 PM
SensorNode LoRaWAN® Firmware Release Notes
v2.6 - Updated serial port commands for volume production - Fixed spurious reset indications in ABP 1.0 FCnt reset support,   which could cause loss of d...
Mon, 14 Sep, 2020 at 11:11 AM
SensorNode LoRaWAN® - Configuration and Usage Guide
The SensorNode provides a number of configurable parameters, to allow its behavior to be tailored to specific applications. Factors affecting the configurat...
Wed, 29 Apr, 2020 at 2:06 PM
Using Integration Documents to Create a Downlink String
A downlink string is a combination of Hex values that triggers the configuration of a device OTA. The downlink string should be sent to the device to effect...
Wed, 2 Sep, 2020 at 7:30 PM