General

Icom Radio GPS Utilisation Manual
The radios must first be programmed. Please consult the article on Programming Icom Radios. There are Icom handheld radios on the market that send GPS i...
Fri, 23 Feb, 2018 at 4:59 PM
ICOM Radio Troubleshooting
If you are not receiving data form your handheld radios then ensure you have done the following: - The base station is powered on - The G100 is powered...
Fri, 23 Feb, 2018 at 5:06 PM
Wiring the G100 to an ICOM Mobile Base Station
The G100 pins that are needed are pins 21 (RX), 22 (TX), and 20 (Ground) as per the harness diagram: Please be wary of the orientation of the...
Fri, 23 Feb, 2018 at 5:07 PM
Icom Radio Programming
In order to use your radios with the G100, they will need to be programmed. This can be done by yourself, if you have the software, or by your supplier. ...
Tue, 8 May, 2018 at 11:14 AM
Setting the ICOM HandHeld Serial Number
Serial numbers are used to allow Telematics Guru (or another third party software) to distinguish one device from another. The serial number for a specific ...
Tue, 27 Feb, 2018 at 3:11 PM