General

Example: Setting up Refrigeration Truck Monitoring
This is an example of a use-case for the G100 in monitoring refrigeration trucks. Setup is the same for a Dart.  The truck is required to be tracked as ...
Mon, 9 Apr, 2018 at 3:45 PM
G100 LED Behaviour
The G100 will flash the LED in the following ways: On startup: a slow 0.5 Hz flash (once every 2 seconds). On connection to the server: a fast 2 Hz flash...
Thu, 10 May, 2018 at 5:50 PM
G100 Default Input Mappings
The following digital inputs are mapped by default for the G100 (though they can be remapped elsewhere), it is important to keep these in mind to avoid clas...
Mon, 11 Jun, 2018 at 4:46 PM
G100 Buzzer Setup
The G100 has an internal buzzer, as does the DMCAN RFID reader.  Note in firmware, setting the 'buzzer' controls: a) The Internal Buzzer b) ...
Wed, 4 Jul, 2018 at 3:38 PM
G100 Lone Worker Alarm
Lone worker is only enabled if the following conditions are met: 1) The lone worker settings have been enabled  2) The device is not in trip (so ignition ...
Tue, 18 Sep, 2018 at 4:27 PM
G100 Firmware Release Notes
v1.16   - Additional Iridium debug logging v1.15  - Buzzing options for harsh driving and digital inputs v1.14  - Recovery mode expiry added.  -...
Fri, 7 Dec, 2018 at 9:51 AM