Hardware

Flexi 1 - Mounting & Enclosure Requirements
The Flexi 1 is sold as a bare PCB, and as such, for most applications will need to be mounted into some for of enclosure. The recommended enclosure is the...
Mon, 1 Aug, 2016 at 10:02 AM
Flexi 1 - What is jumper JP1 for?
JP1 enables/ disables the reverse input voltage protection diode. Leaving it removed has the diode connected in series with Vin, protecting against reve...
Mon, 17 Jul, 2017 at 4:43 PM
Flexi 1 - What do the LEDs and button do?
Most of the time, the LEDs will not light up at all. This is to save power, since the device will most likely not be visible when installed. When power is...
Tue, 2 Aug, 2016 at 12:59 PM
Flexi 1 - External Serial/RS232 Port
The Flexi 1 incorporates a single serial port, which can be used to communicate with external devices or sensors. It supports RS232 and TTL signal level...
Fri, 2 Sep, 2016 at 3:15 PM
Flexi1 - Power
The Flexi1 is designed to be battery powered.  Connect power to the device: VIN + : positive terminal (max 15V). This is usually the RED wire from th...
Tue, 18 Jul, 2017 at 4:02 PM
Flexi1 - External Connections (Screw Terminals)
The external connections are exposed via the screw terminals on the PCB. The functions of each terminal are explained in the table below. Name Fun...
Mon, 11 Sep, 2017 at 9:04 PM