Digital Matter Support

System parameters

Setup information common to all devices

Why are digital input changes not showing on the server straight away?
Currently for all device, a change on a physical digital input will create a log entry on the device, but it will not be uploaded until it's next s...
Mon, 17 Sep, 2018 at 12:16 PM
Input Monitor Setup
The input monitor allows a digital output to be set, or a buzzer to be sounded, based on the state of device digital inputs, and a speed threshold.  Exampl...
Thu, 13 Feb, 2020 at 3:20 PM
Buzzers
'Buzzers' can be sounded on devices for various conditions such as: Speeding violations (when above on-device speed threshold) No Driver ID ...
Fri, 14 Sep, 2018 at 2:16 PM
4G Network Settings
WARNING: If you misconfigure the 4G Network settings, the device will NOT be able to connect to OEM and will NOT receive SMS commands. Once connectivity is ...
Fri, 8 May, 2020 at 5:24 PM
(FAQ) Upload Delay (Latency) after a network error
This article applies to cellular devices. How long will it take the device to upload after a network error? The Digital Matter cellular devices will st...
Mon, 8 Apr, 2019 at 8:43 AM
Tip Detection and Rotation Counting
Overview Some cellular devices (for instance the Remora 2 and Oyster 2) support detecting and counting 'tip' events, and keeping track of rotatio...
Wed, 6 May, 2020 at 7:31 PM
Pulse Counting on DM Devices
The pulse counting feature was added to the Falcon (74.3 & 74.4 hardware revisions) and Eagle models in the first quarter of 2020. This feature allows a...
Mon, 20 Apr, 2020 at 1:48 PM