In the APAC region, they can be purchased from M2M Connectivity.
Our BLE gateway devices scan for all tags within range, and keep a list in memory. This list is uploaded to the server periodically. Tags are then displayed on the Tag Map in Telematics Guru. This flexible format means when any gateway sees a tag in it's vicinity, we can receive a new tag update.
For many cold chain applications, like simply reporting the temperature in the back of a cold truck - the gateway and tag may always stay within range. The gateway and tag are both permanently located/mounted in the truck. In this case, we can instead map 2 x ELA T or RHT tags to device analogues. This limits the the device to reading from only 2 tags at a time, but brings other benefits.
- G120: Firmware 2.24+, BLE FW 2.5+
- Oyster Edge - Integration Pending
- Remora3 - Integration Pending
Key Benefits over 'tag lists':
- No TG-TAG fees per tag
- Tag temp values are written to gateway device analogues meaning:
- Temp values appear in Live-view Popup
- Asset Health Tracking can be utilised
- Alerts can be configured on tag values.
- Temp values appear in Live-view Popup
ELA Tag Setup
We must first configure the ELA Tags. Consult ELA documentation for full details on this process this is an overview of the steps.
We can configure ELA Tags using the ELA Innovations Device Manager Mobile App:
Alternatively, an NFC Reader is available from ELA which can be connected to a PC to manage this via a computer - which may be more convenient when programming many tags.
We must set the tags to send Manufacturer Data in their payload.
- Enable NFC on your mobile device
- Open the ELA Mobile app
- Click on Configuration
- Scan the tag by holding your mobile device directly above the ELA tag
- Once the tag has been read, click on the TAG PARAMETERS tab
- Enable Manufacturer Data Mode
(Click to expand below image)
1. Update Device Firmware
Ensure the device firmware is set to 2.23 or above. Update to the latest if available.
2. Update BLE Firmware
The process is the same to update BLE firmware as the main device firmware above. Set to 2.5 or above. Head here:
Revision is given by the number after the decimal point. i.e. 79.2 is Rev2
3. Configure Parameters
3.1 Configure BLE Scanning Globally
3.2 Enable continuous scanning, and configure ELA Tags under Tag Type
3.3 Configure ELA Tag Mapping Parameters
- Add the tag name as printed on the Tag
- Enable Logging = Yes
- If we want these logs to force an upload, set upload on log to Yes.
- In trip, the modem is always on so these logs always get through.
- Setting this to Yes means even when the G120 is parked we'll still get regular updates when the asset is parked.
- Log interval of 5 mins means we get a temp update every 5 min. Set this to desired interval.
- Temperature is written to Analogue 8 of the G120
- If using a second tag with this G120 - add the 2nd ELA tab, make sure you set different analogue mappings.
Create Analogue Mapping in TG
Create an I/O mapping in TG, the same as you set your Analogue Mappings in device parameters. Conversion factor is 0.01. This tells TG the data coming in via Analogue 8 is the ELA Tag's temperature.
More detail on alerts - Getting Started - Alerts
We can then alert on the analogue which we've mapped the temperature to.
If we require another alert for when the temperature has returned to normal range, we can check this box and include a custom message :
Event Detail Report
To report on all times the asset has breached the allowable temperature range, we can map the alert to an event.
1. Create an Event Type
2. Map the Alert to this event
3. Then the Event Detail or Event Summary Report can be run.
Current temperature reading of all assets
The Asset Analogue Value report can be run to display the current value in device analogues. Which will give the temperature of all assets at the time the report is run.
Graph Temperature over time
The Asset Analogue Graph can be run for this
Asset Health Tracking can be used: