Below is how the G70 operates with its default parameters
- Stationary - Hourly Heartbeats
- The device will log a heartbeat record, connect to the server and refreshes its GPS data every 60 minutes.
- Trip Tracking - Wired and Emulated ignition - The G70 will start a trip if either the
- Ignition wire is pulled high, i.e, over 2.2v is applied to the ignition wire, or
- Movement is detected, ie, a trip is started if >150m of movement from the initial position
- Logging - When the device is in trip, it will turn on it's GPS module and cellular modem and log records based on:
- Time interval
- log a record every 60 seconds or;
- Distance interval
- when 500m is travelled or;
- Heading Change
- when direction is changed by 60° over a short distance (<250m) or;
- when direction is changed by 20° over a long distance (>250m)
- Time interval
The logging intervals are configurable from the logging parameters tab in OEM.
For more information, see G70- Overview of Operation