In OEM Server, we can create a 'connector'. Then, we Set the Connector on a device, and data from this device will be sent to the endpoint specified in the connector setup.
There are TCP or HTTP options, for full details, see Choosing an Integration Strategy. For integration documents (containing the payload information) - contact your branch's support team.
Some 'advanced' connector setups must still be configured by the DM support team - but the majority can now be easily configured and managed on your own!
Creating the Connector
"Connection Manage" Permission
In order to create connectors, and see the "Connectors" menu option - your OEM user account requires the Connection Manage permission. If you can't get to any of the steps shown, contact support and we can enable it.
1. Navigate to "Connectors"
2. Create a New Connector
The connector grid will be shown, if you haven't created any connectors yet, it will be empty, otherwise it will show any connectors which you have created.
Down the bottom left of the grid, click New
The connector dialogue appears:
The option selected for Connector Type varies the other fields. We will go through an example of each type.
Simply enter a name and your IP:Port, along with the group the connector should appear for. In the above example users within the DMA > DMA > Connector client group will be able to see this connector in their list when they go to set it on a device.
It is often useful to set the description as the actual endpoint address - for handy reference in the grid of connectors if you have multiple - but you can enter whatever you wish.
There are a few more options for the HTTP connector
- We can use basic authentication
- We can add up to 5 headers that will be sent with the POST
Also check out this article - The HTTP/HTTPS Connector - which shows various dynamic fields we can make use of. For example, if we set the URL to https://myserver.com/[SERIAL] - the serial of the device that is connecting in will become part of the URL.
A multi-connector allows us to send data to 2 endpoints at once. We create the two individual connectors first, and then 'join' them in the multi. This is typically used when a partner wants to send data to their own server (they would create their own connector for this) - and Telematics Guru.
To configure, just set the type to MULTI and pick your 2 connectors from the dropdown list.
I'm not getting any data to my endpoint
To debug, go back to the device grid in OEM, and verify the device has connected in recently. If it hasn't, the issue isn't with the connector, either wait for the device to upload, 'force' a connection, or see Troubleshooting - Devices Not Connecting.
If it has, you may see that the Since Connected and Since Committed times don't align - in that case see Since Committed/Since Connected and Troubleshooting. First step is to View Server Logs.
How do I delete a connector?
This functionality will be released in a future update. In the meantime perhaps rename it to xxDeleted or similar to drop it to the end of the list.