G62 LoRaWAN® On-Board Odometer

The G62 LoRaWAN® keeps an on-board odometer and run-time accumulator. Given the potential for uplinks to not be received on the server, uploading a count provides a robust solution. 

The run hours and odometer are accumulated when the device is in trip - and the value is uploaded every 24 hrs by default. How to configure this period, and information on the uplinks is covered at the links below:

It is not possible to initialise/reset the value. The device simply accumulates run hours and the odometer over its lifetime. This can be corrected on the server side to provide run hours/odo since a certain date and achieve the same result.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.