4G Battery Powered Device Behavior Effects - EMnify

In order for our battery powered devices to roam on EMnify they require that devices conform to certain specifications. That includes a minimum network registration timeout to allow for IMSI switching. This article outlines the settings that need to be applied to the device if using EMnify. 

To use the EMnify network, the device must have the "APN" & "4G Network" admin parameter tab along with the "Upload Timeouts" system parameter tab set to as shown below:

Please Note

This will only enable the sim cards to connect properly on networks that exist with suitable devices i.e.  4G devices with LTE/CAT-M1 networks.


First add in the Fixed APN for Emnify - 'EM'    

Make sure you set the Access technology to CAT-M1 only and the subsequent selector to Global: Cat-M1 Only

To enable IMSI switching, you need a network timeout great than 5 minutes (300 seconds)


Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.