Digital Matter Support

DM iButton Configurations

iButton Wires:


ColourFunction
GreenGreen LED
BrownRed LED
blackGround
YellowLED Negative(-)
RedSignal wire/LED Positive(+)



Dart2/G100/G120

Molex Harness wires (cut off Molex connector):

ColourFunction
PurpleSystem Rail Output
BlackGround
BrownTTL-Tx
GreenTTL-Rx


LED Blinks on No Driver ID

iButton WireDart Harness
Brown Or GreenPurple (System rail out)
YellowBlack
BlackBlack
RedGreen & Brown

Special System parameters required:


LED Turns on with Ignition

iButton WireDart Harness
Brown Or Green
(If you want the LED to change colour on ignition, connect one LED to External Power)
White-Ignition
YellowBlack
BlackBlack
RedGreen & Brown

LED turns off with Driver ID Scan

(Pdf attached for wiring diagram)


iButton WireDart Harness WireRelay Wire
RedBrown & Green-
Brown and/or GreenRedPurple
Yellow & BlackYellowWhite

Special System parameters required:


G62

Wiring Harness:

ColourFunction
BrownG62 iButton input
BlackGround
RedVehicle positive(+)
GreenSwitched ground
WhiteIgnition


You can turn the LED light on or off depending on your trip or immobilise function by changing where you ground the iButton wire (switched ground, vehicle ground), or attach the positive signal iButton wire (Ignition, vehicle +ve)

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.