The G62 will track trips by default. It will start a trip based on the ignition (white) wire going positive, or based on GPS movement past the trip start threshold.


It is possible to disable trip tracking and get heartbeats only. This is called periodic only tracking in the battery powered product range. The G62 has not been specifically designed for this, so the timing of the heartbeats will not be completely regular because of GPS freshening and movement checks. 


To set this up on the G62, edit the system parameters on www.oemserver.com:

  1. Disable wired ignition:
  2. Disable movement trips:
  3. Optionally, edit the heartbeat: