Connectivity: LTE-M/NB-IoT
- Networks and SIM Card Options
- Device Network Settings
OEM Server
- Getting Started
- Integration
- OEM Installer Page
  - How to Use The Installer Page
- Troubleshooting
- Admin Actions
- MyGeotab
- Reports
  - OEM Battery Low/Critical CSV Export
Bolt2
- Getting Started
- Documents
- Parameters
- Run Hour + Odometer Monitoring
  - Bolt2 - On Device ODO/Run Hours
- Driver Behaviour - Accidents, Harsh Events, Speeding
  - Harsh Event Setup - Bolt2
  - Accident Detection and Reconstruction + Accident Data Exports - Bolt2
- Troubleshooting
  - Troubleshooting - Not Connecting - Bolt2
Dart3
- Getting Started
- Documents
- Configuring IOs
- Parameters
- Run Hour + Odometer Monitoring
  - Dart3 - On Device ODO/Run Hours
- Driver ID + Immobilisation
- Driver Behaviour - Accidents, Harsh Events, Speeding
- Troubleshooting
  - Troubleshooting - Not Connecting - Dart3
- Dart, Dart2
G70 Cellular
- Getting Started
- Documents
- Configuring I/Os
- Parameters
- Run Hour + Odometer Monitoring
  - G70 - On Device ODO/Run Hours
- Driver ID + Immobilisation
- Driver Behaviour - Accidents, Harsh Events, Speeding
- Troubleshooting
  - Troubleshooting - Not Connecting - G70
- G62 Cellular
G120
- G120
- Getting Started
- Configuring IOs
  - Input Monitor [G120]
  - Configure Analogue Input [G120]
- Iridium
- G100
Oyster3 Cellular
- Getting Started
- Documents
- Batteries
- Configuration
- Troubleshooting
- Oyster & Oyster2
Oyster Edge
- Getting Started
- Documents
- Batteries
  - Battery Recommendations [Oyster Edge]
  - Battery Level Monitoring [Oyster Edge]
- Location Engine and Scanning
  - Location Engine Scanning Parameters and Lookups [Oyster Edge]
- Configuration
Oyster3 LoRaWAN®
- Oyster 3 LoRaWAN®
Remora3
- Getting Started
- Documents
  - Update Modem Firmware - Remora3
- Configuration
- Bluetooth® Low Energy
  - Configure Bluetooth® Scanning - [Remora3]
- Remora2 & Remora 3G
Yabby Edge Cellular
- Getting Started
- Batteries
- Location Scanning and Lookups
- General Documents
- Configuration
- Location Engine Config/Lookups
  - Location Engine Scanning Parameters and Lookups [Yabby Edge]
Yabby Edge LoRaWAN®
- Getting Started
- Integration
- Documents
  - Yabby Edge LoRaWAN - Certifications List
Yabby3
- Getting Started
- Documents
- Batteries
- Configuration
Location Engine
- General
Telematics Guru
- Getting Started
  - Introducing Telematics Guru
  - Telematics Guru - Quick Start Guide
  - Create a New Organisation
  - Creating Assets in Telematics Guru
  - TG Region Specific Details
  - Asset Bulk Changes
  - Fair Usage Policy
  - Telematics Guru FAQs
  - Telematics Guru Release Notes
  - TG - Organisation Functionality
- Billing
  - TG - Asset Billing, Admin and Billing Reports
  - Asset Billing Plans - TG-PPM,Classic,PRO
  - PPM Calculator
  - Telematics Guru - ALR Guide
- White Labelling & Portal Customisation
  - Telematics Guru White Labelling
  - Partner's own SMS Gateway
  - Partner Feedback Form
- Creating, Editing and Managing User Accounts
  - Getting Started - Inviting Users
  - Setting up a User Account
  - User Support Permissions + Access to Multiple Organisations
- Live View
  - Live View - Telematics Guru
  - Disable Asset Updates Paused
  - Clustering on the Live View (BETA)
  - Custom Map Overlays in TG
  - Points of Interest and Distance Order Markers
  - Hyperlink on Asset Live View Popup
- Trip History + LogBooking
  - Getting Starting - Trips
  - Telematics Guru - History Views
  - TG App - Managing Trips and Logbooking
- Mobile App
  - Call the Current Driver from the App
  - Push Notifications in the TG App
  - Telematics Guru Mobile Release Notes
- User Guides
  - Tags in Telematics Guru
  - Asset State Configuration
  - Asset Expense Tracking - Getting Started
  - Activating Recovery Mode
  - Asset Health Tracking
  - TG - Utilisation
  - Time and Attendance in Telematics Guru
- Alerts
  - Alerts - Set up an Alert with the Wizard
  - Events vs Alerts
  - Getting Started - Alerts
  - Panic/Duress Alert on Telematics Guru
  - How do I Activate a Movement Alert?
  - Create Alerts on Analogue Values
  - Telematics Guru - Alert Token Definitions
  - Why was my Alert delayed?
  - Set up SMS alerts
  - Duration Condition for Alerts
  - Alert Notifications through WebHooks (Beta)
  - Alert on Live View/Signal Duress - Telematics Guru
- Reports
  - Area Coverage Reports
  - Customize Reports
  - Exporting Telematics Guru Data
  - Finding Iridium IMEIs vs Device Serials
  - The Asset Analogue Report
  - Utilisation report
- BLE® Tags
  - ELA T/ELA RHT Tags in Telematics Guru (Cold Chain)
- Battery Management
  - Battery Management
  - Partner Battery Level Status Report
- TG Troubleshooting
  - Telematics Guru Telemetry - Getting Started
  - Can't Login to the Telematics Guru App?
  - Why Aren't I Receiving my Email/SMS Alerts or Reports?
  - Telematics Guru - Asset Addresses
- Third Party Devices
  - Setup For Pivotel Smartone devices
  - Teltonika FM1120 Setup
  - CalAmp Support (BETA)
  - SPOT Devices (beta)
  - Telematics Guru Third Party Device API
  - JDLink - Telematics Guru
- Security
  - TG - Password Policy
  - Two-Factor Authentication - [TG]
- Checklists (Pre-Start)
  - Checklists in Telematics Guru
  - Setup Checklist to Capture Maintenance
  - Setup Checklist for Installation
- Run Hours, Odometer and Maintenance
  - Run Hours + Odometer in TG
  - Scheduled Maintenance Reminders (SMR)
- Destination Dispatching
  - Destination Dispatching
- Speed Monitoring + Driver Behaviour
  - Speed Monitoring in Telematics Guru
  - Driver Scorecard Report
  - Harsh Driving on Telematics Guru
  - Which Countries Offer Speed Lookup in TelematicsGuru?
  - Geofence Downloads Example: Buzz when over 40km/h inside geofence
  - RAG Report
- Geofences
  - How To Guide: Geo-fences
  - Common Concepts - Geofence Downloads to Device
  - Multi-Layer Geo-Fences
  - Geo-Fence Bulk Import
  - Telematics Guru - Update Asset Project From Destination Geofences
- Admin
  - Admin Actions FAQs
  - Schedule the Devices Not Connecting Report
Information for Partners
- Operational
- Warranty
  - Digital Matter Warranty Returns Policy
Getting Started
- Global Device Information
- General Troubleshooting
- Connectivity
- Common Configurations
- Provisioning Devices
  - DM LoRaWAN™ Default Application EUI's (AppEUI)
Guides
- Global Cellular Concepts
  - Eagle and Falcon - Estimating Battery Life
  - Device Performance in Poor/No Signal Conditions
- Solutions
- Cold Chain Monitoring
- Immobilisation & Driver ID
- Accident Detection & High G events
- Scheduled Maintenance & Run Hours
- Shipping
  - Shipping of DM Devices and Batteries
- Tilt and Tip Detection
  - Tip Detection and Rotation Counting
- Pulse Counting
  - Pulse Counting on DM Devices
Cellular
- Global - Cellular Wired Devices
  - Hard-Wired Devices: How long will my back-up battery last?
  - GPS Jamming and Interference Detection
- Global - Cellular Battery Powered Devices
- Eagle
- Falcon
- Yabby GPS & Yabby Wifi
Bluetooth® Tags, Sensors and Scanners
- Getting Started + FAQ
- Documentation and How To
- 3rd Party Bluetooth Tags and Sensors
- SensorNode Bluetooth®
  - Getting Started - SensorNode Bluetooth®
  - Connecting a SensorNode Bluetooth® to an Eagle, G120 or Remora2
- Guppy Bluetooth®
LoRaWAN®
- General
- Integration (All IoT Devices)
- LoRaWAN® Integration
- Yabby LoRaWAN®
- SensorData LoRaWAN®
- G62 LoRaWAN®
- Guppy LoRaWAN®
- Oyster LoRaWAN®
SigFox
- General
- Documents
  - Oyster Sigfox Getting Started Guide
  - Oyster Sigfox Certifications
- Integration
- Oyster Sigfox on Telematics Guru
  - Oyster Sigfox Default IO Mappings
- SensorData Sigfox
- Batteries
  - Oyster Sigfox Battery Life Estimate Calculator
  - Oyster Sigfox Battery Curves
Sensors
- Supported Sensors

G62 - Technical Drawing

Matt Clark-Massera

Modified on: Fri, 31 May, 2019 at 1:12 PM

Please find attached the technical drawings for the G62 housing.

Blueprint - G62.pdf
(210 KB)