The Remora2 can be set to update on an interval, such as every 6 hours, rather than based upon movement.
This is often referred to as "Periodic Tracking" as opposed to "Movement Based" or "Trip Based" Tracking.
To configure on the Remora2, you will need to Edit the System Parameters, then:
Add the Advanced Tracking parameter, and set Periodic Tracking Only to Yes.
After pressing Update, periodic tracking will be enabled the next time the device connects to the server. The default period is 12 hours, but to change this, also add the Basic Tracking parameter, and change Heartbeat Upload Period to the required period (in Minutes).
Please take into account that for parameters to take affect (as well as enabling recovery mode), the device needs to connect to the server when choosing the upload period.