Digital Matter Sigfox and LoRaWAN devices require a configuration cable in order to program parameters, set LoRaWAN regions, and read device information (AppKey, DevEUI, PAC etc)

It is strongly recommended you purchase a cable from Digital Matter. Damage caused to devices by your own cable is not covered under warranty.

The cable supplied is the following FTDI Cable:


The required pins for Digital Matter devices are:

Black - GND

Yellow - RX

Orange - TX

Which connects to a Molex Connector as shown in the image. This is a 4 position connector with 2mm pin spacing.

This cable is required for all DM Sigfox and LoRaWAN devices - the Yabby LoRaWAN requires this cable plus an extra adapter cable.