The "Speeding" section of the Dart system parameters allows a maximum speed Threshold (km/h) to be stored on the device. If the Threshold speed is set, the device will sound a buzzer output when the GPS speed exceeds the Threshold. The buzzer will remain active until the GPS speed drops Delta (km/h) below the Threshold.
- This has no effect on logging. Speed violation notifications should still be setup on the software platform. This is designed to control driver speed with buzzer feedback.
- An output must be setup as a buzzer on the device. The output (yellow) provides the ground to the buzzer.
How you would setup this example:
Default settings for the Speeding Tab:
Default settings for the Digital Output Tab: