There are custom G150 harnesses available to make integration with the G150 as easy as possible.

MOQs and lead times may apply - please contact support for more information.

Cable Details:

You will receive a cable with an M12 connector on one end, and 4 stripped wires on the other, ready to plug into the G150 connector. There will also be a red wire emerging from the cable, ~15cm from the 4 stripped wires.

The red wire will be ~50cm long.

The overall harness length is ~2050 mm. The above image is of a sample with a shorter length.

Process

Insert the end of the cable with the 4 stripped wires through the black G150 nut, then into the G150 cable gland.

Push the stripped wires firmly into the white connector as per the below image:

Plug into the connector on the G150.

Now plug the M12 into the Iridum Edge, plug the red wire into your power supply, and you are good to go!

To configure the parameters to get the Iridium up and running on your G150, please see:

• G150 Iridium Quick Start Guide