By default, the Dart3 operates as below out of the box 

• Stationary - Hourly Heartbeats
  • The device will log a heartbeat record, connect to the server and refreshes its GPS data every 60 minutes.
• Trip Tracking - Wired and Emulated ignition - The Dart3 will start a trip if either the
  • Ignition wire is pulled high, i.e, over 2.2v is applied to the ignition wire, or
  • Movement is detected >150m of movement from the initial position is required to start a trip.
• Logging - When the device is in trip, it will turn on it's GPS module and cellular modem and log records based on:
  • Time interval
    • log a record every 60 seconds or;
  • Distance interval
    • when 500m is travelled or;
  • Heading Change
    • when direction is changed by 60° over a short distance (<250m) or;
    • when direction is changed by 20° over a long distance (>250m)